Linear actuator Mini 01

Linear actuator Mini 01

Standard version:

  • Three-phase/AC
  • Stroke 3.9 inch
  • Transmission 1-stage
  • Fixing A

The Mini 01 linear actuator with integrated limit stop provides a lifting speed of up to 307 in/min and a lifting force of up to 360 lbs, depending on the gear ratio. The linear actuator has a compact design, making it ideal for applications in reversing mode with narrow installation conditions. Standard drives are splash-protected (IP54), optionally jet-protected (IP65). Additional options increase the number of application options substantially.

Furthermore, design-related adjustments are also conceivable for larger quantities so that the drive motor can be adapted individually to certain requirements.
You can find projects that have already been implemented here.

The Mini series covers lifting speeds of 1 to 386 in/min and a lifting force range of up to 4845 lbs with five sizes, the Mini 0, Mini 01, Mini 1, Mini 2 and Mini 3.

Dimensional drawing standard version

Dimensional drawing Linear actuator Mini 01 fixing A

mm to inch converter

Dimensions marked with * indicate the drive length of a standard drive (i.e. a stroke length of 3.9 inch and a 1-stage or 1:1 transmission ratio). For longer stroke length and/or gear stages please add the corresponding dimensions x and y from the table below.

Gear 1-st. 2-st. 3-st.
x 0 0.67 1.26
+
Stroke length [inch] 3.9 5.9 7.9 9.8 11.8
y 0 3.9 5.9 5.9 7.9

Fixing C

Dimensional drawing Linear actuator Mini 01 fixing C

Fixing D, E, F

Dimensional drawing Linear actuator Mini 01 fixing D, E, F

Standard version / Options

Standard Options
100 mm stroke length AC motors
Mounting version A Motors with special voltage upon request
Thermal protection 4 mounting versions
Splash-proof IP54 Special stroke length up to 11.8 inch
Integrated limit switches With force-dependent shut off
Maintenance-free With adjustment ring
Lifetime lubrication With adjustable rod end
3-phase motor With potentiometer
Drive completely in stainless steel With encoder
With single disk spring-activated brake

AC 3 x 230 / 400 VAC – 60 Hz

Motor

speed

[rpm]

Motor

power

[hp]

Duty

cycle

[%]

Planetary

gear

stages

Trapezoidal

thread

[mm]

Stroke

speed

[inches/min]

Maximum stroke force [lbs]

at stroke length [inch]

3.9 5.9 7.9 9.8

11.8

1560 0.067 15 1:1 10×6 So 369* 37 37 37 37
1560 0.067 15 1:1 10×3 Sd 184* 52 52 52 52
1560 0.067 15 1:1 10×2 Sd 122* 58 58 58 58
1560 0.067 15 1-st. 10×6 So 85* 130 130 130 101
1560 0.067 15 1-st. 10×3 Sd 43 186 186 186 101
1560 0.067 15 1-st. 10×2 Sd 28 186 186 186 186
1560 0.034 40 2-st. 10×6 So 20 280 280 186 101
1560 0.034 40 2-st. 10×3 Sd 9 280 280 186 101
1560 0.030 50-60 2-st. 10×2 Sd 6 280 280 280 186
1560 0.030 50-60 3-st. 10×6 So 4 298 298 186 101
1560 0.030 50-60 3-st. 10×3 Sd 3 298 298 186 101
1560 0.030 50-60 3-st. 10×2 Sd 1 298 298 298 186

So = no self-locking; Ss = static self-locking; Sd = dynamic self-locking
1-stage = 4.3:1
2-stage = 18.9:1
3-stage = 82.3:1
* For stroke speeds of 20 mm/sec. and above, a brake is required.
Duty cycle applies to 10 min. duty time.
For tensile loading, the maximum stroke force of the particular stroke speed applies.
The force and motor power stated at 40% and 60% will not change if the actuator is operated at 15% duty cycle.

AC 3 x 265 / 460 VAC – 60 Hz

Motor

speed

[rpm]

Motor

power

[hp]

Duty

cycle

[%]

Planetary

gear

stages

Trapezoidal

thread

[mm]

Stroke

speed

[inches/min]

Maximum stroke force [lbs]

at stroke length [inch]

3.9 5.9 7.9 9.8

11.8

1560 0.080 15 1:1 10×6 So 369* 45 45 45 45
1560 0.080 15 1:1 10×3 Sd 184* 63 63 63 63
1560 0.080 15 1:1 10×2 Sd 122* 70 70 70 70
1560 0.080 15 1-st. 10×6 So 85* 157 157 157 121
1560 0.080 15 1-st. 10×3 Sd 43 225 225 225 121
1560 0.080 15 1-st. 10×2 Sd 28 225 225 225 225
1560 0.051 40 2-st. 10×6 So 20 337 337 225 121
1560 0.051 40 2-st. 10×3 Sd 9 337 337 225 121
1560 0.035 50-60 2-st. 10×2 Sd 6 337 337 337 225
1560 0.035 50-60 3-st. 10×6 So 4 359 359 225 121
1560 0.035 50-60 3-st. 10×3 Sd 3 359 359 225 121
1560 0.035 50-60 3-st. 10×2 Sd 1 359 359 359 225

So = no self-locking; Ss = static self-locking; Sd = dynamic self-locking
1-stage = 4.3:1
2-stage = 18.9:1
3-stage = 82.3:1
* For stroke speeds of 20 mm/sec. and above, a brake is required.
Duty cycle applies to 10 min. duty time.
For tensile loading, the maximum stroke force of the particular stroke speed applies.
The force and motor power stated at 40% and 60% will not change if the actuator is operated at 15% duty cycle.

AC 3 x 120 / 208 VAC – 60 Hz

Motor

speed

[rpm]

Motor

power

[hp]

Duty

cycle

[%]

Planetary

gear

stages

Trapezoidal

thread

[mm]

Stroke

speed

[inches/min]

Maximum stroke force [lbs]

at stroke length [inch]

3.9 5.9 7.9 9.8

11.8

1560 0.080 15 1:1 10×6 So 369* 45 45 45 45
1560 0.080 15 1:1 10×3 Sd 184* 63 63 63 63
1560 0.080 15 1:1 10×2 Sd 122* 70 70 70 70
1560 0.080 15 1-st. 10×6 So 85* 157 157 157 121
1560 0.080 15 1-st. 10×3 Sd 43 225 225 225 121
1560 0.080 15 1-st. 10×2 Sd 28 225 225 225 225
1560 0.051 40 2-st. 10×6 So 20 337 337 225 121
1560 0.051 40 2-st. 10×3 Sd 9 337 337 225 121
1560 0.035 50-60 2-st. 10×2 Sd 6 337 337 337 225
1560 0.035 50-60 3-st. 10×6 So 4 359 359 225 121
1560 0.035 50-60 3-st. 10×3 Sd 3 360 360 225 121
1560 0.035 50-60 3-st. 10×2 Sd 1 359 359 359 225

So = no self-locking; Ss = static self-locking; Sd = dynamic self-locking
1-stage = 4.3:1
2-stage = 18.9:1
3-stage = 82.3:1
* For stroke speeds of 20 mm/sec. and above, a brake is required.
Duty cycle applies to 10 min. duty time.
For tensile loading, the maximum stroke force of the particular stroke speed applies.
The force and motor power stated at 40% and 60% will not change if the actuator is operated at 15% duty cycle.

AC 1 x 110 VAC – 60 Hz

Motor
speed
[rpm]
Motor
power
[hp]
Duty
cycle
[%]
Planetary
gear
stages
Trapezoidal
thread
[mm]
Stroke
speed
[inch/min]
Maximum stroke force [lbs]
at stroke length [inch]
3.9 5.9 7.9 9.8
11.8
1560 0.058 15 1:1 10×6 So 369* 27 27 27 27
1560 0.058 15 1:1 10×3 Sd 184* 38 38 38 38
1560 0.058 15 1:1 10×2 Sd 122* 43 43 43 43
1560 0.058 15 1-st. 10×6 So 85* 94 94 94 94
1560 0.058 15 1-st. 10×3 Sd 43 135 135 135 121
1560 0.058 15 1-st. 10×2 Sd 28 135 135 135 135
1560 0.058 15 2-st. 10×6 So 20 337 337 225 121
1560 0.058 15 2-st. 10×3 Sd 9 337 337 225 121
1560 0.058 15 2-st. 10×2 Sd 6 337 337 337 225
1560 0.058 15 3-st. 10×6 So 4 360 360 225 121
1560 0.058 15 3-st. 10×3 Sd 3 360 360 225 121
1560 0.058 15 3-st. 10×2 Sd 1 360 360 360 225

So = no self-locking; Ss = static self-locking; Sd = dynamic self-locking
1-stage = 4.3:1
2-stage = 18.9:1
3-stage = 82.3:1
* For stroke speeds of 20 mm/sec. and above, a brake is required.
Duty cycle applies to 10 min. duty time.
For tensile loading, the maximum stroke force of the particular stroke speed applies.
Actuators with single phase motors reach only 60% of the force and motor power of those with 3-phase motors for the 15% duty cycle indicated.
The force and motor power stated at 40% and 60% will not change if the actuator is operated at 15% duty cycle.

Additional information

Contact person

Customized designs

Mini Customized designs

Application examples

Mini overview