Testing & testing methods

Compliance with the functional specifications is now checked in detail. Extensive testing simulates loads in the field.

Everything under control – every detail is important to us

We have our own test laboratory at Framo Morat. This enables us to ensure that your drive solution satisfies all previously defined requirements.

3D microscope

3D-Microscope
  • Infinitely variable magnification from 0.1x to 2000x
  • Create microscopic images with high depth of focus from different viewing angles
  • 2D and 3D measurement of geometric elements
  • Height measurement
  • Optical measurement of surfaces
  • Non-contact measurement of surface roughness
  • Conduct residual protection analyses

Lifecycle

Endurance test
  • Lifecycle test according to the load/functional specifications
  • Recording/evaluation of torque, speed, force, path, current, voltage, temperature

Maximum and continuous loads

Permanent load
  • Inspection of technical data according to the load/functional specifications
  • Torque testing from 0.01 to 3.000 Nm
  • Dynamic pull and pressure testing from 0.1 N to 100 kN
  • Speeds of 1 to 8.000 rpm

Motor inspection

Motor test
  • Determining and verifying the specific values and characteristic curves of the motor

Noise test

Noise test
  • Airborne noise measurement (dB-A, dB-C)
  • Structure-borne noise measurement

Leakage test

Leak test
  • Under the influence of different media (internal and external)

Ambient influences

Climate test
  • Temperatures from -40 °C to + 180 °C