Linear actuator Mini 1

Linear actuator Mini 1

Standard version:

  • Three-phase/AC
  • Stroke 5.9 inch
  • Transmission 1-stage
  • Fixing A

The Mini 1 linear actuator with integrated limit stop provides a lifting speed of up to 321 in/min and a lifting force of up to 787 lbs, depending on the gear ratio. The linear actuator has a compact design, making it ideal for applications in reversing mode with narrow installation conditions. Standard drives are splash-protected (IP54), optionally jet-protected (IP65). Additional options increase the number of application options substantially.

Furthermore, design-related adjustments are also conceivable for larger quantities so that the drive motor can be adapted individually to certain requirements.
You can find projects that have already been implemented here.

The Mini series covers lifting speeds of 1 to 386 in/min and a lifting force range of up to 4845 lbs with five sizes, the Mini 0, Mini 01, Mini 1, Mini 2 and Mini 3.

Dimensional drawing standard version

Dimensional drawing Linear actuator Mini 1 fixing A

mm to inch converter

Dimensions marked with * indicate the drive length of a standard drive (i.e. a stroke length of 5.9 inch and a 1-stage transmission ratio).
For longer stroke length and/or gear stages please add the corresponding dimensions x and y from the table below.

Gear 1:1 1-st. 2-st. 3-st.
x 0 0 0.79 1.57
+
Stroke length [inch] 5.9 7.9 9.8 11.8 13.8 15.7
y 0 1.97 3.94 5.91 7.87 9.84

Fixing C

Dimensional drawing Linear actuator Mini 1 fixing C

Fixing D, E, F

Dimensional drawing Linear actuator Mini 1 fixing D, E, F

Standard version / Options

Standard Options
3.9 inch stroke length AC motors
Mounting version A Motors with special voltage upon request
Thermal protection 4 mounting versions
Splash-proof IP54 Special stroke length up to 18.7 inch
Integrated limit switches With single disk spring-activated brake
Maintenance-free With adjustment ring
Lifetime lubrication With adjustable rod end
3-phase motor With potentiometer
Drive completely in stainless steel With encoder

AC 3 x 230 / 400 V – 50 Hz

Motor
speed
rpm
Motor
power
hp
Duty
cycle
%
Planetary
gear
stages
Trapezoidal
thread
Stroke
speed
[inch/min]
Maximum stroke force [lbs]
at stroke length [inch]
5.9 7.9 9.8
11.8
13.8
15.7
1656 0.290 15 1:1 12×6 So 386* 112 112 112 112
1656 0.290 15 1:1 12×3 Sd 193* 158 158 158 158
1656 0.290 15 1:1 12×2 Sd 128* 168 168 168 168
1656 0.290 15 1-st. 12×6 So 91* 410 410 291 175
1656 0.290 15 1-st. 12×4 Ss 60* 466 466 466 306
1656 0.290 15 1-st. 12×3 Sd 45 468 468 291 175
1656 0.290 15 1-st. 12×2 Sd 30 615 615 511 306
1656 0.177 40 2-st. 12×6 So 20 652 652 291 175
1656 0.177 40 2-st. 12×4 Ss 14.2 652 652 511 306
1656 0.177 40 2-st. 12×2 Sd 7.1 652 652 511 306
1656 0.097 50-60 3-st. 12×4 Ss 2.8 652 652 511 306
1656 0.097 50-60 3-st. 12×2 Sd 1.4 652 652 511 306

So = no self-locking; Ss = static self-locking; Sd = dynamic self-locking
1-stage = 4.3:1
2-stage = 18.9:1
3-stage = 82.3:1
* For stroke speeds of 47 inch/min. and above, a brake is required.
Duty cycle applies to 10 min. duty time.
For tensile loading, the maximum stroke force of the particular stroke speed applies.
The force and motor power stated at 40% and 60% will not change if the actuator is operated at 15% duty cycle.

AC 3 x 265 / 460 VAC – 60 Hz

Motor

speed

rpm

Motor

power

hp

Duty

cycle

%

Planetary

gear

stages

Trapezoidal

thread

Stroke

speed

[inch/min]

Maximum stroke force [lbs]

at stroke length [inch]

5.9 7.9 9.8

11.8

13.8

15.7

1656 0.290 15 1:1 12×6 So 386* 135 135 135 135
1656 0.290 15 1:1 12×3 Sd 193* 191 191 191 191
1656 0.290 15 1:1 12×2 Sd 128* 202 202 202 202
1656 0.290 15 1-st. 12×6 So 91* 494 494 350 211
1656 0.290 15 1-st. 12×4 Ss 60* 561 561 561 368
1656 0.290 15 1-st. 12×3 Sd 45 564 564 350 211
1656 0.290 15 1-st. 12×2 Sd 30 741 741 615 368
1656 0.177 40 2-st. 12×6 So 20 786 786 350 211
1656 0.177 40 2-st. 12×4 Ss 14.2 786 786 615 368
1656 0.177 40 2-st. 12×2 Sd 7.1 786 786 615 368
1656 0.097 50-60 3-st. 12×4 Ss 2.8 786 786 615 368
1656 0.097 50-60 3-st. 12×2 Sd 1.4 786 786 615 368

So = no self-locking; Ss = static self-locking; Sd = dynamic self-locking
1-stage = 4.3:1
2-stage = 18.9:1
3-stage = 82.3:1
* For stroke speeds of 47 inch/min. and above, a brake is required.
Duty cycle applies to 10 min. duty time.
For tensile loading, the maximum stroke force of the particular stroke speed applies.
The force and motor power stated at 40% and 60% will not change if the actuator is operated at 15% duty cycle.

AC 1 x 110 VAC – 60 Hz

Motor
speed
rpm
Motor
power
hp
Duty
cycle
%
Planetary
gear
stages
Trapezoidal
thread
Stroke
speed
[inch/min]
Maximum stroke force [lbs]
at stroke length [inch]
5.9 7.9 9.8
11.8
13.8
15.7
1656 0.107 40 1:1 12×6 So 386* 45 45 45 45
1656 0.107 40 1:1 12×3 Sd 193* 62 62 62 62
1656 0.107 40 1:1 12×2 Sd 128* 70 70 70 70
1656 0.107 40 1-st. 12×6 So 91* 187 187 187 187
1656 0.107 40 1-st. 12×4 Ss 60* 225 225 225 225
1656 0.107 40 1-st. 12×3 Sd 45 247 247 247 247
1656 0.107 40 1-st. 12×2 Sd 30 281 281 281 281
1656 0.107 40 2-st. 12×6 So 20 272 405 211 211
1656 0.107 40 2-st. 12×4 Ss 14.2 272 272 369 369
1656 0.107 40 2-st. 12×2 Sd 7.1 272 272 369 369
1656 0.107 40 3-st. 12×4 Ss 2.8 272 272 369 369
1656 0.107 40 3-st. 12×2 Sd 1.4 272 272 369 369

So = no self-locking; Ss = static self-locking; Sd = dynamic self-locking
1-stage = 4.3:1
2-stage = 18.9:1
3-stage = 82.3:1
* For stroke speeds of 47 inch/min. and above, a brake is required.
Duty cycle applies to 10 min. duty time.
For tensile loading, the maximum stroke force of the particular stroke speed applies.
Actuators with single phase motors reach only 60% of the force and motor power of those with 3-phase motors for the 15% duty cycle indicated.
The force and motor power stated at 40% and 60% will not change if the actuator is operated at 15% duty cycle.

Additional information

Contact person

email hidden; JavaScript is required

Customized designs

Mini Customized designs

Application examples

Mini overview